Single Shaft Plastic Shredder
Programmable
Control
Modular
Combination
lnstallation
Multiple
Materials
Process
Applicable materials
General Description
The AGS General Purpose Single Shaft Shredder has a 457mm diameter profiled rotor made of
74rpm . The concave ground, aggressive 4-way rotating knives are mounted in the grooves of
the profiled rotor with special knife holders. This enables a reduction of the cutting gap
between the counter knives and the rotor which guarantees a high flow rate ,low power
consumption and maximum output of shredded material.
The hydraulically operated ram feeds the material automatically in the rotor’s cutting
chamber by load-related controls. The hydraulic system is equipped with high-pressure valves
and volumetric flow controls which can be set according to the requirements of the input
material.
Extremely robust pedestal bearing housings are mounted outside the machine and separate to
the cutting chamber to prevent dust dirt penetrating into the oversized bearing. This
ensures a long service life and minimum service and maintenance.
Power is transmitted from the motor by a drive belt via an oversized gearbox which is located
on the shaft end on one end of the rotor.
A safety switch prevents machine startup when the front panel is open and the machine
features emergency stop buttons on the machine body and control panel.
Unit Introduction
Rotor
Large diameter flat rotor
Machined pocket knife holders
Optional hard facing
Gear box
50000 hours long stable running
Vertical compact structure
Long time operation without oil leakage
Horizontal pusher design
Robust ram construction
Powerful hydraulic swing type ram
Reduced footprint
Touch screen
PLC automatic control
Rotor Knives and Stator Knives
1-1.5mm gap
Hard D2 material
Concave ground square knives
Bearing
Famous brand from Japan
high strength and toughness
Floor Plan
Technical Data
|
ITEM |
UNIT |
AGS850 |
AGS1200 |
AGS1500 |
AGS2000 |
|
|
Cutting Chamber |
mm |
840×1570 |
1120×1570 |
1400×1570 |
1960×1570 |
|
|
Rotor Diameter |
mm |
457 |
457 |
457 |
457 |
|
|
Rotor Speed |
rpm |
74 |
74 |
74 |
74 |
|
|
Main Motor Power |
kw |
37/45/55 |
55 |
75 |
74 |
|
|
Rotor Knives |
pcs |
60 |
81 |
102 |
144 |
|
|
Stator Knives |
pcs |
2×3 |
2×4 |
2×5 |
2×7 |
|
|
Hydraulic Ram Power |
kw |
3.75 |
5.6 |
5.6 |
5.6 |
|
|
Screen Size |
mm |
40~100 |
40~100 |
40~100 |
40~100 |
|
|
Screen Working Area |
mm |
800×730 |
800×1000 |
800×1290 |
800×1860 |
|
|
Dimensions |
A |
mm |
2300 |
2300 |
2300 |
2300 |
|
B |
mm |
1650 |
1650 |
1650 |
1650 |
|
|
C |
mm |
540 |
540 |
540 |
540 |
|
|
D |
mm |
660 |
660 |
660 |
660 |
|
|
E |
mm |
2250 |
2250 |
2250 |
2250 |
|
|
F |
mm |
350 |
350 |
350 |
350 |
|
|
G |
mm |
2000 |
2280 |
2600 |
3720 |
|
Standard
Alternative